Product Catalog

Technical grade benzene for styrene production cyclohexane synthesis and as solvent in chemical manufacturing. Produced by catalytic reforming with consistent quality. Supplied in isotanks or bulk tanker with ADR hazardous goods documentation.

Technical grade n-butanol produced by oxo synthesis process. Used as solvent in coatings lacquers and resins manufacturing. Low water content and consistent purity make it suitable for demanding industrial applications. Available in bulk tanker quantities.

High purity copper sulfate pentahydrate for printed circuit board electroplating applications. Low halide content below 2 ppm. Consistent crystal size for reliable dissolution rate. Approved by major PCB fabricators for use in high-density interconnect boards.

Chlorinated rubber resin with 65 percent chlorine content for marine and industrial protective coatings. Excellent chemical and water resistance. Compatible with alkyd and vinyl resins. ISO 9001 certified production.

Anhydrous citric acid for descaling limescale removal and pH adjustment in industrial cleaning formulations. Food contact approved for CIP cleaning applications in food and beverage industry. Supplied in 25kg bags and 1000kg big bags.

Class E2 calibration weight set 1mg to 200g for analytical and precision balance calibration. OIML R111 compliant with UKAS accredited calibration certificate. Stainless steel construction with carrying case and tweezers.

Ferric sulfate solution 40 percent for phosphorus removal in wastewater treatment plants. Low manganese and chromium content meeting stringent water treatment chemical standards. Supplied with delivery pumping assistance and dosing recommendations.

Composite IBC 1000 litre with inner HDPE bottle and galvanized steel outer cage for chemical storage and transport. UN31HA1/Y packing group II and III certification. BSCI certified manufacturer. Reconditioned units available at reduced cost.

High molecular weight hyaluronic acid sodium salt for pharmaceutical and cosmetic applications. Produced by bacterial fermentation using non-animal origin process. Endotoxin tested and sterile filtered grades available for injectables.

Synthetic polyethylene glycol based brake fluid meeting DOT 4 and SAE J1703 specifications. Dry boiling point 265 degrees C wet boiling point 165 degrees C. Excellent rubber seal compatibility and anti-corrosion properties.

Technical grade potassium permanganate for water treatment iron and manganese removal and industrial oxidation processes. Consistent assay 99 percent minimum. Available in 25kg polyethylene-lined fiber drums. UN1490 compliant transport.

Pharmaceutical grade L-ascorbic acid meeting USP and FCC specifications. Used in injectable formulations oral dosage forms and as antioxidant in pharmaceutical preparations. Low heavy metals content verified by ICP-MS analysis.

Industrial grade sodium hydroxide flakes with 99 percent minimum purity. Used in water treatment soap manufacturing pulp and paper and chemical synthesis. Low iron content grade available for textile and food applications. Packaged in 25kg PP bags.

Styrene monomer for polystyrene ABS and SBR rubber production. Inhibited with 10-20 ppm TBC for storage stability. Polymerization inhibitor content verified analytically. Full chain custody documentation available for regulatory compliance.

Rutile grade titanium dioxide pigment with excellent opacity and durability for architectural and industrial coatings. Surface treated with alumina and silica for improved dispersibility and weatherability. Meets ISO 591 and ASTM D476 specifications.

Mixed xylene isomers for use as solvent in coatings lacquers and chemical processing. Produced from catalytic reforming with consistent composition. Low sulfur content below 1 ppm. Available in bulk quantities from Hamburg terminal.

High purity ibuprofen API for analgesic and anti-inflammatory drug formulations. Produced under FDA-inspected GMP conditions in Basel. Particle size distribution controlled for optimal dissolution. DMF available for US and EU registrations.

Technical grade sodium hypochlorite 12.5 percent active chlorine for water disinfection and industrial bleaching. Stabilized formula with reduced chlorate formation. Meets EN 901 standard for water treatment chemicals. Available in 1000L IBC and bulk.

Liquid bisphenol-A epoxy resin EEW 182-192 g/eq for high performance protective coatings flooring systems and adhesives. Low viscosity grade for easy formulation. Complies with food contact regulations FDA 175.300. Available in 20kg and 200kg containers.

High purity technical toluene for solvent applications coatings production and chemical synthesis. Low water and non-volatile residue content. Available in 200L drums 1000L IBC and bulk tanker quantities with competitive European pricing.

C5 aliphatic hydrocarbon resin for pressure sensitive adhesives hot melt formulations and rubber compounding. Softening point 99-105 degrees C with excellent tackification and compatibility with EVA SIS SBS and natural rubber.

Metformin hydrochloride active pharmaceutical ingredient for type 2 diabetes medications. Meets BP EP and USP specifications. Produced in dedicated non-penicillin facility with cross-contamination controls. Available in 25kg fiber drums.

Injection molding grade polypropylene homopolymer with melt flow index 12 g/10min. Excellent stiffness and dimensional stability for automotive interior parts packaging and consumer goods. Low warpage and outstanding surface finish.

Liquid polyaluminium chloride 30 percent Al2O3 for drinking water and wastewater treatment. Basicity 75-85 percent for optimal flocculation over wide pH range. Meets NSF/ANSI 60 for potable water application. Supplied in 1000L IBC containers.